SPORTS AFIELD SA30SM INSTRUCTION MANUAL Pdf Download (2024)

FAQs

What is the factory code for Sports Afield? ›

Be careful, in choosing your new security code, you'll want to be sure that you can operate the unit quickly without making an error. Key in the preset factory code [ 1 5 9 # ]. The right light will turn green.

All Sports Afield Maximum Security Series gun safes come with a preset factory code of [ 1 2 3 4 5 6 # ].

This could be an indication that the lock has an electronic short. There could have been damage to the lock's ribbon cable during installation. This may be a problem with the keypad. The safe boltwork may be blocking the lock bolt from extending.

You should try to choose a safe made with thick steel that is between 12- and 6-gauge for the greatest protection. Gun safe metal that is 12-gauge is 2.057mm (0.081”) thick, while 6-gauge is 4.166mm (0.164”) thick. You will pay more for thicker gun safe steel, but it is well worth it.

From small home safes to massive full-size safes, none of them are that easy to move around. Entry-level gun safes typically weigh between 200-600 pounds. Mid-range safes weigh between 600 and 1,000 pounds. High-end weigh in between 1,000 to 1,600.

Gun rust is a big problem for those who store their firearms in gun safes. In fact, corrosion tends to happen at a higher rate and more rapidly in a gun safe than out of it. The reason has to do with basic chemistry.

— The “reset” button is a red or green colored button located on the back cover or the side frame (hinge side) of the door or inside of the lower back cover of the door. 2. Enter your new digit code (1-8 digits), then press * button. 3.

This means your combination code is retained even if the battery has gone dead and is no longer powering the lock. If this happens, simply replace the battery. For added security, you can deliberately remove the batteries from the lock and replace them when you need access to the safe.

The nine-volt battery in your safe's electronic keypad lock should normally last between 8,000 to 10,000 openings.

What happens if I can't open my safe? ›

If your safe door refuses to open, it is possible that the lock is jammed or that there is a problem with the locking mechanism. If you have a key safe, the key may be bent or the lock damaged. If you have a code safe, the electronic lock may not be working properly.

If the battery is running low, your lock could still have enough power to light up its display keypad and make its normal beeps. You might even hear the lock click as if the lock is disengaging, only to find it still locked. Solution: This is an easy fix of just changing the battery.

Combination Safes: Manipulating the lock or using a stethoscope can help access combination safes without the code. Electronic Safes: Resetting electronic codes or using an override key are options for electronic safes when the code is forgotten.

The factory-set code will display for a few seconds in the instrument cluster located above your steering wheel. Make sure you are ready to record the information. If it does not display after performing the above steps, visit your Ford Dealer for further assistance. Dealer fees may apply.

How to Open LP NL Electronic Lock. Enter code (Factory User code = 1-2-3-4-5-6), unlock door and open. If not opened within 3 seconds, the lock secures automatically. If code entry failed on the first attempt wait 20 seconds before re-entering.

Step 2: Turn handle counter clockwise inmediately after. The factory preset code is 1-2-3-4-5-6 and should be changed before using the safe.

(factory set to 1 2 3 4 5 6) 3). Enter your NEW six (6) digit code two times.